Eagle Bag Break Stations

 
Eagle Bag Break Station Model 30-820.

 Unloading material received in bags is easy, clean and ergonomically safe when you use an Eagle Bag Break Station. Eagle’s Bag Unloading Station is available in a variety of modes depending on the bagged material unloaded. Whether your process calls or a fine powder, granular, flake or palletized material, Eagle’s Unloading Station is configured to ensure a clean, dust controlled environment.
Simple, efficient, modular design permits the selection of equipment that best suits your material. An open hopper with a bag grate for non-dusting materials, add a hood and door for limited dust control, or add a dust collector for fine, dusty powders.
The modular design allows the transfer of bagged material into a screw conveyor system, a vacuum conveyor system, or a pressure system.
Heavy duty, all welded construction in mild steel or stainless steel for handling materials under sanitary or non-sanitary conditions.
  • Modular Design
  • Heavy Duty mild steel construction
  • Discharge Opening 12 Inches, Centered Flange 16 ¼” x 16 ¼”
  • Discharge Options: Screw Conveyor System, Vacuum Pump System, or Pressure System.
  • Bag Break Grate Lifts Out For Easy Cleaning
  • Stacking paControl Panel Access Door, One Piece Up Swinging Door  Provides A Sealed Closure For The Station When Not In Use. The Door Has A Durable  Piano Hinge At The Top And A Compressed Air Cylinder mounted On Each Side To Hold  The Door Open When The Station Is In Use.
  • Bag Shelf, 10" Deep, Is Located At Door Level 36" From The Floor.
  • Finish: Eagle Gray Scratch Resistant Enamel, or Cust. Spec

Model No.

Capacity Ft3

Capacity Lbs

Est. Shipping Weight

Description

30-800

8

350

350

8 Ft3 Hopper & Grate

30-801

8

450

365

8 Ft3 Hopper & Grate and Dust Hood & Door

30-802

8

980

395

8 Ft3 Hopper & Grate, Dust Hood & Door, and Dust Collector Unit

30-850

20

1500

435

20 Ft3 Hopper & Dust Collector with Auger Discharge
         

Bag Compactor Standard Features:

Available to efficiently handle discarded bags. The compactor can easily compact 320 bags into a 16” x 24” x 36” high bale, which weighs approximately 150 lbs.
Includes: Compacted Bag Cube and Plastic Bag Liner.
Capacity: Loose Waste – 2 cubic yards
Motor Size: 5 HP / 115/230V / 1 PH / 60HZControl Panel NEMA 12 with start/stop buttons & compactor full light.
Model 30-905 is shipped Pre-assembled, ready to mount directly to Eagle’s Bag Break Station.
Finish: Eagle Gray Scratch Resistant Enamel, or Cust. Spec.

Bag Compactor Specifications

Model No.

Capacity Lbs

Est. Ship Weigh

 Description

30-900

4 Ft3

550

 Hydraulic Compactor

30-905

4 Ft3

550

 Hydraulic Compactor to mate with Eagle Model 30-802 Bag Break Station.