Eagle Bag Break Stations
Bulk Material Handling Specialists
HOME
CHEMICAL INDUSTRY
PLASTICS INDUSTRY
FOOD INDUSTRY
PHARMACEUTICAL INDUSTRY
BIOFUELS INDUSTRY
INSTALLATION SERVICES
COMPONENTS & PARTS
The Eagle Group, Ltd. • 8384 W. Peck Road, Greenville, MI 48838 • Phone (616) 754-7777 • Fax (616) 754-1555 • sales@eaglegroupltd.com
Eagle Bag Break station with Eagle Compactor
Eagle Bag Break Station Model 30-820
Unloading material received in bags is easy, clean and ergonomically safe when you use an Eagle Bag Break Station. Eagle’s Bag Unloading Station is available in a variety of modes depending on the bagged material unloaded. Whether your process calls or a fine powder, granular, flake or palletized material, Eagle’s Unloading Station is configured to ensure a clean, dust controlled environment.
Simple, efficient, modular design permits the selection of equipment that best suits your material. An open hopper with a bag grate for non-dusting materials, add a hood and door for limited dust control, or add a dust collector for fine, dusty powders.
The modular design allows the transfer of bagged material into a screw conveyor system, a vacuum conveyor system, or a pressure system.
Heavy duty, all welded construction in mild steel or stainless steel for handling materials under sanitary or non-sanitary conditions.
Standard Features:
· Modular Design
· Heavy Duty mild steel construction
· Discharge Opening 12 Inches, Centered Flange 16 ¼” x 16 ¼”
· Discharge Options: Screw Conveyor System, Vacuum Pump System, or Pressure System.
· Bag Break Grate Lifts Out For Easy Cleaning
· Control Panel
· Access Door, One Piece Up Swinging Door Provides A Sealed Closure For The Station When Not In Use. The Door Has A Durable Piano Hinge At The Top And A Compressed Air Cylinder mounted On Each Side To Hold
The Door Open When The Station Is In Use.
· Bag Shelf, 10" Deep, Is Located At Door Level 36" From The Floor.
· Finish: Eagle Gray Scratch Resistant Enamel, or Cust. Spec.
Dust Collection System Standard Features:
Activated when the bag break station is opened and continues to run until the door is closed. When the dust collector shuts off, an automatic filter shaker is activated to clean internal filters automatically.
Pre-assembled, ready to mount directly to Eagle’s Bag Break Station.
Available to efficiently handle discarded bags. The compactor can easily compact 320 bags into a 16” x 24” x 36” high bale, which weighs approximately 150 lbs.
Includes: Compacted Bag Cube and Plastic Bag Liner.
Capacity: Loose Waste – 2 cubic yards
Motor Size: 5 HP / 115/230V / 1 PH / 60HZ
Control Panel NEMA 12 with start/stop buttons & compactor full light.
Model 30-905 is shipped Pre-assembled, ready to mount directly to Eagle’s Bag Break Station.
Finish: Eagle Gray Scratch Resistant Enamel, or Cust. Spec.
|
Model No. |
Capacity Lbs. |
Est. |
Description |
|
30-800 |
8 Ft3 |
350 |
8 Ft3 Hopper & Grate |
|
30-801 |
8 Ft3 |
450 |
8 Ft3 Hopper & Grate and Dust Hood & Door |
|
30-802 |
8 Ft3 |
980 |
8 Ft3 Hopper & Grate, Dust Hood & Door, and Dust Collector Unit |
|
30-850 |
20 Ft3 |
1,500 |
20 Ft3 Hopper & Dust Collector with Auger Discharge |
|
Model No. |
Capacity Lbs. |
Est. |
Description |
|
30-900 |
4 Ft3 |
550 |
Hydraulic Compactor |
|
30-905 |
4 Ft3 |
550 |
Hydraulic Compactor to mate with Eagle Model 30-802 Bag Break Station. |